Feed Water Valve

Feed-water-valve-main-view

Equipped with Couplings and Mounting Brackets

Product Code

WLCV……

Description

  • Valve sizes from 1/2″ to 2″
  • Stainless steel body, bronze bobbin, stainless steel top and bottom plates and aluminium mounting plate
  • Servo Torque 37ft lbs
  • NEMA 4 Rated
  • IP65 Rated
  • Position feedback potentiometer from Servomotor
  • Flange Spec: ANSI 300lb or PN40

Note:
The feedwater valve is not classed as a full shut off valve (bubble tight). However, the tolerances are set very tight thus restricting flow through the valve. For this reason it is advised to place a normally closed solenoid valve in series with the feedwater valve. The further advantage of this is that in the event of a power failure, the feedwater valve will remain in the position at loss of power, however, the normally closed solenoid valve will shut off restricting flow to the boiler.

Specification

Nominal Size of LineMaximum Allowable PressureMaximum Allowable TemperatureTest Pressure
1/2″ (15mm)580 psi (40 Bar)446 F (230C)870 psi (60 Bar)
3/4″ (20mm)580 psi (40 Bar)446 F (230C)870 psi (60 Bar)
1″ (25mm)580 psi (40 Bar)446 F (230C)870 psi (60 Bar)
1 1/2″ (40mm)580 psi (40 Bar)446 F (230C)870 psi (60 Bar)
2″ (50mm)580 psi (40 Bar)446 F (230C)870 psi (60 Bar)

Feed Water Valve